Hello, on my controller I have two Pads for sync.
One syncs leftdeck to rightdeck and vice versa.
The Pad-LED should blink, if pitch isn´t 100%.
Strangely enough, one of them is always flashing, even when BOTH Decks are set to 100% pitch.
But only if PITCHLOCK is activated.
How can both LEDs stop blinking if pitch is 100% without deactivate PITCHLOCK?
Thank You for any Ideas
Greetings
Svenino
LED Script:
deck left pitch 100% ? color green : blink ? color green : color 10% green
and the same for right with "deck right".
The Script for Syncing when holding (and pitch reset) is:
holding ? deck right masterdeck & deck left sync & pitch_lock on : pitch_lock on & deck left masterdeck & deck left pitch_reset
And the same vice versa for the other Pad.
One syncs leftdeck to rightdeck and vice versa.
The Pad-LED should blink, if pitch isn´t 100%.
Strangely enough, one of them is always flashing, even when BOTH Decks are set to 100% pitch.
But only if PITCHLOCK is activated.
How can both LEDs stop blinking if pitch is 100% without deactivate PITCHLOCK?
Thank You for any Ideas
Greetings
Svenino
LED Script:
deck left pitch 100% ? color green : blink ? color green : color 10% green
and the same for right with "deck right".
The Script for Syncing when holding (and pitch reset) is:
holding ? deck right masterdeck & deck left sync & pitch_lock on : pitch_lock on & deck left masterdeck & deck left pitch_reset
And the same vice versa for the other Pad.
Posted 4 days ago @ 7:34 pm
Linkes Pad
Rechtes Pad
Die Logik liest sich so (eine einzige Kette):
deck left get_pitch_zero 0.5% → Pitch ist (innerhalb der Toleranz) auf 100 %? → solid grün
sonst blink → LED ist gerade in der Blink-„An“-Phase? → grün an
sonst → grün 10 % (die dunkle Phase des Blinkens)
LED-Skript des Pads (komplett, ein Befehl):
Die Logik liest sich so:
deck left get_pitch_zero 0.5% & deck right get_pitch_zero 0.5% → beide Decks innerhalb der Toleranz auf 100 %? → solid grün
sonst blink → Blink-Phase gerade „an“? → grün an
sonst → grün 10 % (dunkle Blink-Phase)
Anders formuliert: Solange mindestens ein Deck nicht auf 100 % steht, fällt die UND-Bedingung durch und die LED blinkt – genau das Verhalten, das du willst, nur eben für beide Decks gemeinsam auf einem Pad.
Deine Pad-Aktion (hold/release) bleibt unverändert, da sie ja ohnehin beide Richtungen in einem Skript
deck left get_pitch_zero 0.5% ? color 'green' : blink ? color 'green' : color 'green' 10%
Rechtes Pad
deck right get_pitch_zero 0.5% ? color 'green' : blink ? color 'green' : color 'green' 10%
Die Logik liest sich so (eine einzige Kette):
deck left get_pitch_zero 0.5% → Pitch ist (innerhalb der Toleranz) auf 100 %? → solid grün
sonst blink → LED ist gerade in der Blink-„An“-Phase? → grün an
sonst → grün 10 % (die dunkle Phase des Blinkens)
LED-Skript des Pads (komplett, ein Befehl):
deck left get_pitch_zero 0.5% & deck right get_pitch_zero 0.5% ? color 'green' : blink ? color 'green' : color 'green' 10%
Die Logik liest sich so:
deck left get_pitch_zero 0.5% & deck right get_pitch_zero 0.5% → beide Decks innerhalb der Toleranz auf 100 %? → solid grün
sonst blink → Blink-Phase gerade „an“? → grün an
sonst → grün 10 % (dunkle Blink-Phase)
Anders formuliert: Solange mindestens ein Deck nicht auf 100 % steht, fällt die UND-Bedingung durch und die LED blinkt – genau das Verhalten, das du willst, nur eben für beide Decks gemeinsam auf einem Pad.
Deine Pad-Aktion (hold/release) bleibt unverändert, da sie ja ohnehin beide Richtungen in einem Skript
Posted 3 days ago @ 7:32 pm
Thank You very much, also for posting in german - great!
At last, no more annoying flashing for no reason!
It works fine, just had to replace color green 10% with color 10% green
At last, no more annoying flashing for no reason!
It works fine, just had to replace color green 10% with color 10% green
Posted 2 days ago @ 3:10 pm
super hättes auch im deutschen teil posten können aber egal..
Posted 2 days ago @ 5:31 pm





